Features:
· Capacity 4000 KG(9,000 LB).
· 2000mm(78 4/5”) max lifting height
· Large Platform
· surfaced mounted or flush-mounted
· Air-actuated locks
· Zerk grease fittings at each hinge point
· Separate Self-Contained Control Panel

Technical details:
Lifting Capacity: 4000kg(9000lb)
Lifting Height: 1800mm(70.9")
Rolling Jack Lifting Height: 500mm(19.7")
Minimum Lifting Height: 335mm(13.2")
Length Overall: 4500mm(177.2")
Width Overall: 2100mm(82.6")
Runway Length: 600mm(23.6")
Runway Width: 900mm(35.4”)
Air Pressure: 6-8 bar

Highlights:
- Extended platform, suitable for more wheelbase models.
- Pneumatic unlocking design, 4-point locking system, more time saving and convenient for unlocking.
- The hydraulic power unit is equipped with a oil flow adjusting device, which can adjust the descending speed.
- With steel rope breakage protection device, safe operation.
- The runway spacing can be adjusted to adapt to vehicles with different wheel widths.
- It is equipped with a variety of spacer blocks for different wheelbase and turntable sizes.
- A jacking beam is provided as optional, and the jacking beam operates lifting and descending independently.
- 24V safe operation control system.
- Approved by 115% dynamic load test and 150% static load test.

Technical details:
- Lifting capacity : 5000KG(11,000 lbs.)
- Lifting height : 245MM(9-1/2") - 1800MM( 74-3/4")
- Jacking beam height : 50( 2") - 450MM( 17- 3/4")
- Jacking beam capacity : 3000KG(6,600 lbs.)
- Air pressure : 6-8Bar

Features:
Ultra-thin design, surface installation, and the lift volume can reach 4500KG
The support arm plate structure adopts 16Mn steel plate to lift stably
The lifting height is up to 2070MM, which is more ergonomics the 685MM widened platform and the overall plane design on the platform make it more stable to get on the platform
A secondary lifting device as the standard, one-side extension is suitable for different wheelbase models
Adopt 6-cylinder driving mode and equipped with mechanical safety lock
Intelligent computer version control operation is more convenient
Optional secondary descent function
Hydraulic control adopts a one-key leveling patent design
The height upper limit switch is standard
Hydraulic explosion-proof valve as standard
Emergency manual unlocking function as standard 24V safe operating voltage
Double-side pulling can be selected for the secondary lifting platform
Selecting an infrared synchronous detection device to effectively prevent uneven
platform After 120% dynamic load test and 150% static load test

Technical details:
Main lifting capacity: 4500kg
Lift table lifting capacity: 3000kg
Lifting Height: 2070mm
Minimum height: 230mm
The lifting height of the lift table: 400mm
Platform length: 4600mm
Total length: 6110mm
Platform width: 680mm
Platform spacing: 900mm
Motor power: 3.5KW
system pressure: 250pa
Whole machine Weight: 2880KG

Bright 3D Wheel Alignment Machine A750

Features:
* Auto Tracking Camera Beam can also be operated manually by PG UP/PG DOWN on the keyboard. Camera movement allows work from the ground to 2.0 meters
* User-friendly Italian-designed software. Ability to adjust the workflow to suit the workshop.
* Precise measurement
* High-resolution cameras that work in multiple lighting, including direct sunlight. 10million pixel HD.
* High-resolution anti-glare UV-filtered targets
* Self-centering H style clamps, 10″-26″ wheels- Quickly and easily clamp wheels without removing hub caps
* Works in all lighting conditions, you are able to adjust the sensor from within the program to suit the current lighting inside your workshop to maintain accurate readings
* Factory calibrated, no need for maintenance calibration
* Alignment data for over 60,000 vehicle models, the database is the same as used by Corghi, Eagle SMF. Yearly updates are available.

Measuring ranges:
- Total toe ± 20°
- Half toe ± 10°
- Camber ± 10°
- Caster ± 30°
- Kingpin ± 30°
- Set back ± 22°
- Thrust angle ± 10°
- Steering difference ± 20°

Supplied as standard with:
- turntables
- turntable transition block
- steering wheel lock
- brake pedal lock
- wheel chocks
- Windows 10 PC
- Monitor - 32″ full height

Features:
Independent development of Italian software to ensure smooth operation.
Double-screen 32+21-inch display screen, no dead angle to watch data changes
The standard fixture can meet the clamping of 10 to 26-inch rims.

Technical details:

MEASURING RANGE:
Total toe: ±48°
Partial toe: ± 26°
Camber: ±20°
Caster: ±30°
King-pin: ±30°
Set-back: ±25°
Thrust angle: ±15°

ACCURACY:
Total toe: ±3′
Partial toe: ±2′
Camber: ±3′
Caster: ±5′
King-pin: ±2′
Set-back: ±2′
Thrust angle: ±2′

Computerized wheel aligner with 8 CCD-camera sensors and data transmission by radio (2,4 GHz).
FEATURES:
- Computerized wheel aligner with 8 CCD-camera sensors and data transmission by radio (2,4 GHz).
- Prepared for the alignment of heavy vehicles, trucks, trailers, and semi-trailers
- High-frequency radio data transmission (2,4 GHz)
- CCD sensors for angles measuring
- Software in Windows
- Language choice between 34 options
- Car and vans data bank with over 40000 vehicles
- Sensors power supply by Ni-Mh rechargeable batteries (6 for each sensor), recharger on cabinet
- Prepared for the alignment of heavy vehicles, trucks, trailers, and semi-trailers (optional KIT TRUCK).
- CCD sensors for angle measuring.
- Sensors switch off when inactive.
- A sensor fitted with a keypad for starting the run-out compensation program.
- The steering angle is measured directly by the sensor.
- Run-out compensation program, for each individual wheel (vehicle with raised wheel) or simultaneously on the four wheels (by pushing the vehicle).
--------------------
Made In Italy
Cormach SRL