Bright 3D Wheel Alignment Machine A750

Features:
* Auto Tracking Camera Beam can also be operated manually by PG UP/PG DOWN on the keyboard. Camera movement allows work from the ground to 2.0 meters
* User-friendly Italian-designed software. Ability to adjust the workflow to suit the workshop.
* Precise measurement
* High-resolution cameras that work in multiple lighting, including direct sunlight. 10million pixel HD.
* High-resolution anti-glare UV-filtered targets
* Self-centering H style clamps, 10″-26″ wheels- Quickly and easily clamp wheels without removing hub caps
* Works in all lighting conditions, you are able to adjust the sensor from within the program to suit the current lighting inside your workshop to maintain accurate readings
* Factory calibrated, no need for maintenance calibration
* Alignment data for over 60,000 vehicle models, the database is the same as used by Corghi, Eagle SMF. Yearly updates are available.

Measuring ranges:
- Total toe ± 20°
- Half toe ± 10°
- Camber ± 10°
- Caster ± 30°
- Kingpin ± 30°
- Set back ± 22°
- Thrust angle ± 10°
- Steering difference ± 20°

Supplied as standard with:
- turntables
- turntable transition block
- steering wheel lock
- brake pedal lock
- wheel chocks
- Windows 10 PC
- Monitor - 32″ full height

Features:
· Capacity 4000 KG(9,000 LB).
· 2000mm(78 4/5”) max lifting height
· Large Platform
· surfaced mounted or flush-mounted
· Air-actuated locks
· Zerk grease fittings at each hinge point
· Separate Self-Contained Control Panel

Technical details:
Lifting Capacity: 4000kg(9000lb)
Lifting Height: 1800mm(70.9")
Rolling Jack Lifting Height: 500mm(19.7")
Minimum Lifting Height: 335mm(13.2")
Length Overall: 4500mm(177.2")
Width Overall: 2100mm(82.6")
Runway Length: 600mm(23.6")
Runway Width: 900mm(35.4”)
Air Pressure: 6-8 bar

Highlights:
- Extended platform, suitable for more wheelbase models.
- Pneumatic unlocking design, 4-point locking system, more time saving and convenient for unlocking.
- The hydraulic power unit is equipped with a oil flow adjusting device, which can adjust the descending speed.
- With steel rope breakage protection device, safe operation.
- The runway spacing can be adjusted to adapt to vehicles with different wheel widths.
- It is equipped with a variety of spacer blocks for different wheelbase and turntable sizes.
- A jacking beam is provided as optional, and the jacking beam operates lifting and descending independently.
- 24V safe operation control system.
- Approved by 115% dynamic load test and 150% static load test.

Technical details:
- Lifting capacity : 5000KG(11,000 lbs.)
- Lifting height : 245MM(9-1/2") - 1800MM( 74-3/4")
- Jacking beam height : 50( 2") - 450MM( 17- 3/4")
- Jacking beam capacity : 3000KG(6,600 lbs.)
- Air pressure : 6-8Bar

Computerized wheel aligner with 8 CCD-camera sensors and data transmission by radio (2,4 GHz).
FEATURES:
- Computerized wheel aligner with 8 CCD-camera sensors and data transmission by radio (2,4 GHz).
- Prepared for the alignment of heavy vehicles, trucks, trailers, and semi-trailers
- High-frequency radio data transmission (2,4 GHz)
- CCD sensors for angles measuring
- Software in Windows
- Language choice between 34 options
- Car and vans data bank with over 40000 vehicles
- Sensors power supply by Ni-Mh rechargeable batteries (6 for each sensor), recharger on cabinet
- Prepared for the alignment of heavy vehicles, trucks, trailers, and semi-trailers (optional KIT TRUCK).
- CCD sensors for angle measuring.
- Sensors switch off when inactive.
- A sensor fitted with a keypad for starting the run-out compensation program.
- The steering angle is measured directly by the sensor.
- Run-out compensation program, for each individual wheel (vehicle with raised wheel) or simultaneously on the four wheels (by pushing the vehicle).
--------------------
Made In Italy
Cormach SRL