Features & benefits:

Detects a broad range of gases.
Audible tone and LED display indicate the severity of a leak.
It can be operated during charging or used up to 12 hours between charges.
Ergonomic, handheld design.
Rugged side grips for added durability.
Automatic shutoff.
Easy-to-clean probe assembly.
A universal AC power adaptor (U.S., UK, Europe, Australia, Japan).

Leak Detector Specifications
Detectable Gases: Helium, nitrogen, argon, carbon dioxide, hydrogen*
Battery: Rechargeable nickel-metal hydride (NiMH) internal battery pack (12 hours normal operation)
Ambient Temperature: 50–98.6 °F (10–37 °C)
Humidity Range: 0–97%
Certification/Compliance: CE (EU, Korea, Japan, Australia)
Indoor Use Only

Limits of Detection:
These gases can be detected with the Restek electronic leak detector at the following leak rates:
Minimum Detectable Gas Limits and Indicating LED Color:
Helium, 1.0 x 10-5, red LED
Hydrogen*, 1.0 x 10-5, red LED
Nitrogen, 1.4 x 10-3, yellow LED
Argon, 1.0 x 10-4, yellow LED
Carbon dioxide, 1.0 x 10-4, yellow LED

Gas detection limits measured in atm cc/sec.

Technical details:
Battery rating: 12 hours of normal operation
Battery type: NiMH
Leak indicator: Incremental visual (LEDs) -Incremental audible
Helium leak sensitivity: 1 x 10-5 cc/sec
Weight: 252 grams

Fluke Connect + Fluke's 1587 FC Insulation Multimeter helps you identify tough problems, fix them, and wirelessly communicate your work quickly and easily - all at a safe distance.

Add diagnostics with Fluke Connect
The Fluke 1587 FC is Fluke Connect-enabled so you can download the free Fluke Connect® Measurements app to your smartphone and gain additional functions, including:

Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely.
Quickly seeing and sharing measurement results wirelessly with your smartphone.
Find problems by saving and comparing measurements over time on a wireless device.
PI/DAR timed ratio tests with TrendIt™ graphs to identify the moisture and contaminated insulation problems faster
Memory storage through Fluke Connect saves measurements to your phone or the cloud and eliminates the need to write down results. Reduces errors and saves data for historical tracking over time
Temperature compensation to establish accurate baselines and relevant historical comparisons
Provides memory storage through Fluke Connect Measurements to eliminate the need to write down results
Includes live circuit detection to prevent insulation test if voltage >30 V is detected
Incorporates VFD low-pass filter for accurate variable frequency motor drive measurements
Includes auto-discharge of capacitive voltage for added user protection
Measures ac/dc voltage, DC millivolts, ac/dc milliamps, resistance, and continuity
Includes capacitance, diode test, temperature, min/max, frequency measurements, and insulation test smoothing reading
Automatically powers off to save battery power
*Useful resources and rugged tools for Solar professionals*

Technical details:
CAT rating: CAT III 1000 V - CAT IV 600 V
True-RMS readings: yes
Voltage AC/DC: 1000 V
Current AC/DC: 400 mA
Resistance: 50 MΩ
Capacitance: 10,000 μF
Temperature: -40 °C to 537 °C

Features:
- The tester checks the amount of leakage in an engine cylinder & helps determine the source
- Best used when comparing a suspect cylinder to a know good cylinder on the same engine
- Ideal for testing trucks & late-model cars where clearance is minimal
- Equipped with 2 pressure gauge accurate results
Designed to detect a variety of common engine faults including cylinder head cracks and blow head gaskets
Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure
Suitable for use in any petrol engine with 10, 12, 14mm spark plug