Highlights:
- Column with 5mm steel plate to ensure strength.
- Column bottom foot plate with 16mm to ensure the foundation is stable.
- High strength carriage design, the overall 14mm plate bending.
- Lifting arm with strengthening design, prevent deformation.
- Equipped with foot guardrail as standard.
- Equipped with the height limit Microswitch as standard.
- The high strength fine teethlocking mechanism, more closely meshing.
- The floor connection plate height is only 28mm, convenient for maintenance.
- With diameter 115mm steelrope pulley, preventing steel rope wear out, for more smooth operation.

Technical details:
- Lifting capacity : 4000KG
- Lfit time : 40s
- Lifit Height : 1900mm
- Minimum Height : 98mm
- Overall Height : 2830mm
- Post Distance : 2800mm
- Overall Width : 3350mm
- Motor Power : 2.2KW
- Power Input : 220V/380V

Highlights:
- Extended platform, suitable for more wheelbase models.
- Pneumatic unlocking design, 4-point locking system, more time saving and convenient for unlocking.
- The hydraulic power unit is equipped with a oil flow adjusting device, which can adjust the descending speed.
- With steel rope breakage protection device, safe operation.
- The runway spacing can be adjusted to adapt to vehicles with different wheel widths.
- It is equipped with a variety of spacer blocks for different wheelbase and turntable sizes.
- A jacking beam is provided as optional, and the jacking beam operates lifting and descending independently.
- 24V safe operation control system.
- Approved by 115% dynamic load test and 150% static load test.

Technical details:
- Lifting capacity : 5000KG(11,000 lbs.)
- Lifting height : 245MM(9-1/2") - 1800MM( 74-3/4")
- Jacking beam height : 50( 2") - 450MM( 17- 3/4")
- Jacking beam capacity : 3000KG(6,600 lbs.)
- Air pressure : 6-8Bar

Highlights:
- Column with 5mm steel plate to ensure strength.
- Column bottom foot plate with 16mm to ensure the foundation is stable.
- High strength extra long carriage design, the overall 14mm plate bending.
- Lifting arm with stengthening design, prevent deformation.
- The silder block has quick change fuction, convenient for maintenance.
- The high strength fine teeth locking mechanism. more closely meshing.
- With diameter 115mm steal rope pulley, preventing steel rope wear out, for more smooth operation.
- Equipped with the height limit Microswitch as standard.
- Equipped with foot guardrail as standard.

Technical details:
- Lifting capacity: 4000KG(8800lbs)
- Lift time: 40s
- Lift Height: 1900mm(75*)
- Minimum Height: 98mm(3.8*)
- Overall Height: 3705mm(146*)
- Post Distance: 2800mm(110*)
- Overall Width: 3350mm(130*)
- Motor power: 2.2KW(3HP)
- Power supply: 220V
- Total weight: 650KG(1445lbs)

Highlights:
- Double cylinder drive, mechanical synchronized structure, ensuring platform synchronization.
- Equipped with two-side mechanical safety locks to ensure that the lift is effectively locked and protected at different heights.
- Pneumatic unlocking, convenient and durable.
- The labor-saving movable mechanism design, easy to move, is available as optional.
- The 1960mm wide platform is suitable for more vehicles.
- Extended supportable platform suitable for longer wheelbase vehicles.
- With the strengthen arm design, and the lifting is more stable.
- All connecting shafts are equipped with grease injection holes to ensure smooth movement in operation.
- Oil cylinder with oil return pipe to prevent oil cylinder from rusting.
- Anti-overturning function is included as standard, effectively preventing the lift from overturning.
- The foot guard rail can be optional.
- 24V safe control to ensure the safety in use.

Technical details:
- Lifting capacity : 3000KG
- Lifting time : 40S
- Lifting height : 1000MM
- Minimum height : 110MM
- Length for platform : 1460MM
- Width for platform : 560MM
- Total width platform : 1960MM
- Motor power : 2.2KW
- Power supply : 220V/380V

Small body with huge function, large 19 inch LCD monitor with lively image, two values automatically input, pedal break function which ensure the position more accurate. Laser light indicates at six o’clock position to stick the weight, conform to ergonomics. Classics comes from discovery.
Highlights:
- The machine has Italian software, user-friendly.
- Automatic acquisition of diameter, distance . The machine has 5 ALU balancing programs and 2 ALU smart balancing programs.
- The machine also has optimization function and weight split function.
- The diameter of balancing shaft is 40mm so it can work with standard accessories.
- The machine has motorcycle balancing programs, it can balance various motorcycle wheels.
- The calibration is easy to proceed, the machine can quickly get back its precision.
- The machines can be optionally equipped with motorcycle adaptor.
- The machine is equipped with 19" LCD monitor.
- The machine will go into stand-by when it is not being used for a certain time.
- LED illuminator for easy and clear operation.
- Six o’clock weight placement mode, with laser indicating line, fast and convenient.

Technical details:
- Rim diameter 1” - 28” inch
- Max wheel weight 70 kg
- Max wheel diameter 1118 mm
- Rim width 1,5” - 20” inch
- Precision ±1g
- Motor Power 90W
- Power supply 100/230V 1ph Rotation per minute 140rpm
- Balancing time 7s
- Second time mounting test ≤5g

CB 75P: ماكينة ترصيص ماركة برايت العالمية ثلاثي, HAWEKA الاكسسوارات الخارجية المانية الصنع, SIEMENS جميع المكونات من الداخل المانية الصنع, السوفت وير ايطالي ITALIAN SOFTWARE, قطر الجنط: 1 - 28 بوصة, عدد 140 لفة / دقيقة, الحد الاقصي لوزن العجلة 70 كيلو جرام, مجهز بخاصية الليزر لدقة أعلي BT-X-100000, مجهز بشاشة كمبيوتر للترصيص بتكنولوجيا فائقة التطور, يحتاج فقط الي 7 ثواني لترصيص في المرة, مصدر الكهرباء 220 فولت

Small body with huge function, large 19 inch LCD monitor with lively image, two values automatically input, pedal break function which ensure the position more accurate. Laser light indicates at six o’clock position to stick the weight, conform to ergonomics. Classics comes from discovery.
Highlights:
- The machine has Italian software, user-friendly.
- Automatic acquisition of diameter, distance . The machine has 5 ALU balancing programs and 2 ALU smart balancing programs.
- The machine also has optimization function and weight split function.
- The diameter of balancing shaft is 40mm so it can work with standard accessories.
- The machine has motorcycle balancing programs, it can balance various motorcycle wheels.
- The calibration is easy to proceed, the machine can quickly get back its precision.
- The machines can be optionally equipped with motorcycle adaptor.
- The machine is equipped with 19" LCD monitor.
- The machine will go into stand-by when it is not being used for a certain time.
- LED illuminator for easy and clear operation.
- Six o’clock weight placement mode, with laser indicating line, fast and convenient.

Technical details:
- Rim diameter 1” - 28” inch
- Max wheel weight 70 kg
- Max wheel diameter 1118 mm
- Rim width 1,5” - 20” inch
- Precision ±1g
- Motor Power 90W
- Power supply 100/230V 1ph Rotation per minute 140rpm
- Balancing time 7s
- Second time mounting test ≤5g

Advanced technology car wheel balancer CB78P, with inverter processing system, find the imbalance position 100% precisely. Three no-contact sonar to diagnose the tire performance and automatically measure the tire width, ultra-low noise motor, you will never ignore the possessive desire when you first touch the screen, the only purpose you want to achieve is to be the leader in the tire service industry.
Highlights:
- The machine has Italian software
- Automatic acquisition of diameter, distance and width. The machine has 1 ALU balancing programs and 2 ALU smart balancing programs.
- The machine also has optimization function and weight split function.
- The diameter of balancing shaft is 40mm so it can work with standard accessories.
- The machine has motorcycle balancing programs, it can balance various motorcycle wheels.
- The calibration is easy to proceed, the machine can quickly get back its precision.
- The machine uses sonar to measure the wheel width.
- Radial and lateral sonar can detect the surface conditions of the tyre.
- The touch screen monitor is sitting on flexible bracket so the user can operate the machine from different positions.
- The machine is equipped with 19" LCD monitor.
- The machine will go into stand-by when it is not being used for a certain time.
- Variable frequency motor low-level noise, it can locate the wheel on imbalance position accurately.
- LED illuminator for easy and clear operation.
- Intelligent toggle of STD and ALS2 balance modes.
- Six o’clock weight placement mode, with laser indicating line, fast and convenient.

Technical details:
- Rim diameter 1” - 28” inch
- Max wheel weight 70 kg
- Max wheel diameter 1118 mm
- Rim width 1,5” - 20” inch
- Precision ±1g
- Motor Power 370W
- Power supply 100/230V 1ph
- Rotation per minute 140rpm
- Balancing time 7s
- Second time mounting test ≤5g

Bright 3D Wheel Alignment Machine A750

Features:
* Auto Tracking Camera Beam can also be operated manually by PG UP/PG DOWN on the keyboard. Camera movement allows work from the ground to 2.0 meters
* User-friendly Italian-designed software. Ability to adjust the workflow to suit the workshop.
* Precise measurement
* High-resolution cameras that work in multiple lighting, including direct sunlight. 10million pixel HD.
* High-resolution anti-glare UV-filtered targets
* Self-centering H style clamps, 10″-26″ wheels- Quickly and easily clamp wheels without removing hub caps
* Works in all lighting conditions, you are able to adjust the sensor from within the program to suit the current lighting inside your workshop to maintain accurate readings
* Factory calibrated, no need for maintenance calibration
* Alignment data for over 60,000 vehicle models, the database is the same as used by Corghi, Eagle SMF. Yearly updates are available.

Measuring ranges:
- Total toe ± 20°
- Half toe ± 10°
- Camber ± 10°
- Caster ± 30°
- Kingpin ± 30°
- Set back ± 22°
- Thrust angle ± 10°
- Steering difference ± 20°

Supplied as standard with:
- turntables
- turntable transition block
- steering wheel lock
- brake pedal lock
- wheel chocks
- Windows 10 PC
- Monitor - 32″ full height

The device is suitable for all types of cars, private cars, minibusses, and light trucks
The amount of nitrogen produced from the device is 80 liters/minute

Technical details:
Working temperature range: 20—70℃
Power supply: 220V 50-60Hz
Power: 30W
Inlet pressure: 6-10 Bar / 0.6-1 MPa
Nitrogen output pressure: 6-8 Bar / 0.6-0.8 MPa
Nitrogen purity: 95% - 99.5%
Nitrogen storage tank capacity: 80L
------------------
BRIGHT Technology

Features:
ZD05 leverless kit, patented technology from Italy, testified in the European market through years with the capability to perform mounting/demounting operations toward a wide range of tire types.
Pneumatic controlled ZD05 leverless kit
Standardly equipped with left tire lifter
Professional right helper with upper and lower pressing rollers in independent operate function promotes work efficiency
Centre post clamping design suit the operation needs for various tire types, free from rim scratches.

Technical data:
Rim range: 12”- 30”
Rim width: 3"-14"
Max wheel diameter: 1100 mm
Work pressure: 8 - 10 bar
Bead break force: 2800 kg
Voltage: 110V/220V/380V
Motor power: 0.75kW / 1.1kW
Rotation per minute: 6.5/13 rpm
noise: ＜70dB
Machine dimension: 2300x1750x2050mm

It took three years to do market research, and tested in 20 tire shops, 48 times of checking on site, traveled 50,000 kilometers , then we produced 870L. This machine has extra low working table, make operation easy and comfortable. Reinforced parts make the machine strong. Stability, durability and efficiency are the constant pursuit of this product .

Highlights:
- Ergonomically machine body height.
- The horizontal swing arm is strengthened, extend service life, lifetime warranty.
- Lock handle is strengthened, extend service life, lifetime warranty.
- Modified bead breaking arm, breaking force increased by 30%.
- Strengthened machine body increased overall robustness.
- The silver alloy contactor on 40A switch to ensure it can bear large load, longevity.
- Optimized design of demounting head, greatly release the tire tension during demounting.
- Optional : equipped with PL241 upper assist arm ,increase mounting and demounting range, labor saving.

Technical details:
- Outside clamping range : 10” - 22” inch
- Inside clamping range : 12” - 25 inch
- Rim width : 3” - 14” inch
- Max wheel diameter : 1010 mm
- Working pressure : 8 - 10 bar
- Bead breaking force : 2500 kg
- Powers supply : 110V/220V/380V
- Motor Power : 0.85kW
- Rotation per minute : 6.5rpm
- Noise : ＜70dB

With the development of automobiles, more and more explosion-proof tires and flat tires appear. In order to solve the problem of difficulty, laborious and easily damaged tires, 887N arises at the right moment

Technical details:
- Outside Clamp : 11" - 24" inch
- Inside Clamp : 13" - 26" inch
- Rim width : 3" - 14" inch
- Max wheel diameter : 1100mm
- Working pressure : 8 - 10 bar
- Bead breaking force : 2800 KG
- Power supply : 110V/220V/380V
- Motor Power : 0.75Kw/1.1Kw
- Rotation per minute : 6.5/13rpm (Optional, must be 3Ph power)
- Noise : <70dB

Concentrate on truck tire service for 15 years, non-stop improving and updating, Now it becomes professional equipment for truck and bus tires.
Highlights:
- Adopted hydraulic control system, reliable rim clamping, move stable. Hydraulic pump station adopted imported components with good stability .
- Meet CE requirement, totally safe during operation.
- Lifting arm cylinder is center supported , bear pressure average.
- Movable operating station can be fully observed during operation to prevent danger by misoperation.
- The gearbox is made of aluminum alloy die casting, with light weight, beautiful appearance, high intensity and good sealing performance.
- The electric cabinet adopted CE level protection standard.
- Lifting arm and the base are made of strengthened and thickened metal, with high intensity.
- Lifting arm cylinder equipped safety protection device to increase the safety of operation.

Technical details:
Rim Diameter : 14” - 26” inch
Rim width : 1000 mm
Max wheel diameter : 1600 mm
Hydraulic Power : 130 - 150 bar
Hydraulic Station Motor Power : 1.5KW 380V/3PH 50HZ
Main Shaft Motor Power : 1.8KW 380V/3PH 50HZ
Noise : ＜75dB

Enjoy automatic tire changing process, extra large size, makes the service easy. High horsepower driven source and stronger transmission system, the powerful assistant for the professional tire manufacturer.
Highlights:
- Meet CE requirement, totally safe during operation.
- The lifting arm oil tank is equipped with double safety protection which improves the safety of operation.
- Fully automatic tire changer adopts pneumatic and hydraulic power control system to improve working efficiency, labor saving.
- The hydraulic pump station adopts imported components with stable performance.
- The gearbox is made of aluminum alloy die casting, with light weight, beautiful appearance, high intensity and good sealing performance.
- Movable operating unit can be fully observed during operation to prevent danger from misoperation.
- Dual speed main shaft motor can improve the working efficiency.

Technical details:
- Rim Diameter : 14” - 40” inch
- Rim range with extension : 40 - 56” inch
- Rim width : 1100 mm
- Max wheel diameter : 2200 mm
- Hydraulic Power : 130 - 150 bar
- Hydraulic Station Motor Power : 1.5kW 380V/3PH 50HZ
- Main Shaft Motor Power : 2.4/3.0kW/380V/50HZ/3P
- Noise : ＜75dB