- Jump starter and Power Bank with lithium battery (technology LiFePO4 = Lithium - Iron - Phosphate).
- Quick start of motorcycles, cars and vans with 12V and 24V battery.
- SMART BOOSTER TECHNOLOGY It protects against reverse polarity and short circuit and it prevents jump start operation if the FAST battery is discharged (voltage below 11V), preserving the device itself.
- Powering smartphones, tablets and other commonly used portable devices.
- High J-BME3s: it is the energy supplied by the jump starter within three seconds of cranking to keep the engine run.
- Reduced weight and size, the lithium battery stores four times the energy of a lead battery with the same weight.
- Quick charge
- High brightness LED lamp, with selectable fixed lighting, flashing alarm and SOS signal.

Technical details:
- Input voltage : 1 Ph - 100/240V 50/60 Hz
- Boosting voltage (Volt) : 12-24V
- Boosting current max (Amp) : 12V 3000A - 24V 2000A
- Boosting current (1V/C) (Amp) : 12V 700A - 24V 500A
- Battery capacity : 35000mAh
- Battery types : Automotive: Pb (WET - AGM - GEL)
- J-BME3s (Joule-Battery Maximum Energy) : 20000J
- For engines up to - Ta=25°C - (Petrol) : 8000cc
- For engines up to - Ta=25°C - (Diesel) : 5000cc
- USB 1 output : 5V - 2,1A
- USB 2 output : 5V - 1,0A
- DC output : 12V - 10A
- Input (Jack) : 15V - 1A
- Charging time : 7h
---------
Made In Italy

- Portable battery charger
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU:100% Copper windings

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 1000W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 35A
- Effective charging current (Amp) : 50A
- Battery capacity (Ah min/max) : 15 / 500Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy

- Automatic battery chargers with program for charge conservation (pulse recharge).
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop.
- Multi step charging: the batteries are charged by applying sophisticated multi-step programs.
- High efficency: "I-U" Charging characteristic (constant current - constant voltage) minimises battery charging time.
- Maintenance Function "Pulse Maintenance": can remain connected to the battery for a long time. Keeps the battery ready for use through the pulse charge.
- Safety guaranteed: designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof.
- Protection degree: IP65
- Lightweight and compact battery charger.
> Built for outdoor use.
> 8 Steps charging program.
> Battery, starter and alternator tester
- 5 different operation modes:
> Normal Charging: 7,0 Amp - 14,4 Volt >>> 7,0 Amp - 14,7*Volt
> * Cold weather and AGM Power batteries
> Battery "Equalization" function can be added to all charging programs (Reconditioning: 1,5Amp 16,0 Volt).
- DC Power supply (7 Amp 13,6Volt). Starting the charge of batteries having to low charge / "Back-up".

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 120W
- Voltage limitation (Volt) : 14,4 - 14,7V
- Nominal battery voltage (Volt) : 12V
- Average charging current (Amp) : 7A
- Battery capacity (Ah min/max) : 14 - 150Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 5
- Protection degree (IP) : IP65
---------
Made In Italy

* Professional battery charger and stabilized power supply controlled by microprocessor.
- High efficiency with inverter and PFC technology.
- Easy to use thanks to the quick use menu and buzzer sound.
- Programs are multi-language.
* Battery charger
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start&Stop and Lithium-Ion batteries (LiFePO4).
- "I-U0" Charging characteristic with fl oating maintenance; customizable multi step charging program.
- Battery equalization and desulphation functions.
* Stabilized power supply
- Power supply to support diagnostics and setup of automotive electronic control units.
- Back-up function to power vehicle electronics while the battery is being replaced.
- Power supply for showrooms vehicles (with or without battery); "lockup" function to avoid improper use; option for automatic start up when powered by the network.
- Stabilized power supply adjustable in voltage and current for particular uses.
- Thanks to the SD Card reader, it is possible to update the software adding new charging programs.
- It is possible to use cables of diff erent length (up to 5m) keeping the device calibrated.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 2000W
- Voltage limitation (Volt) : 16V
- Nominal battery voltage (Volt) : 12V
BATTERY CHARGER:
- Average charging current (Amp) : 2 - 120A
- Battery capacity (Ah min/max) : 2 - 2400Ah
- Battery types : Automotive : Pb (WET - AGM - GEL) - Lithium (LiFePO4)
- Traction : Pb (Deep Cycle)
- Charging programs : 5
STABILIZED POWER SUPPLY:
- Output voltage regulation : 12 - 15V
- Output current : max 120A
- Max output voltage : 16V
- Standard cables lenght : 2 m
- Protection degree (IP) : IP20
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,36 - 13,5 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 40A
- Effective charging current (Amp) : 60A
- Battery capacity (Ah min/max) : 5 - 800Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 400A
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,7 - 16,8 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 50A
- Effective charging current (Amp) : 80A
- Battery capacity (Ah min/max) : 5 - 1000Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 900A
- Boosting current (Amp 1 Volt / EL) : 500A
---------
Made In Italy

- Wheeled battery charger and quick starter / Battery 12 - 24 Volt, 35 > 800 Ah
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, Start & Stop
- Fast charging with timer
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 2,3 / 15 kW
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 70A
- Effective charging current (Amp) : 105A
- Battery capacity (Ah min/max) : 35 / 800Ah
- Battery types : Automotive : Pb (WET - AGM)
- Charging positions (N°) : 4
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 460A
---------
Made In Italy