|
- Portable battery charger
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 300W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 12A
- Effective charging current (Amp) : 20A
- Battery capacity (Ah min/max) : 10 / 250Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy
|
- Portable battery charger
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU:100% Copper windings
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 1000W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 35A
- Effective charging current (Amp) : 50A
- Battery capacity (Ah min/max) : 15 / 500Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy
|
- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 530W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 3,0 - 6,5 - 13A
- Effective charging current (Amp) : 22A
- Battery capacity (Ah min/max) : 15 / 260Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy
|
- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 760W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 5,5 - 11 - 22A
- Effective charging current (Amp) : 37A
- Battery capacity (Ah min/max) : 30 / 450Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy
|
- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,36 - 13,5 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 40A
- Effective charging current (Amp) : 60A
- Battery capacity (Ah min/max) : 5 - 800Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 400A
---------
Made In Italy
|
- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps
Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,7 - 16,8 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 50A
- Effective charging current (Amp) : 80A
- Battery capacity (Ah min/max) : 5 - 1000Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 900A
- Boosting current (Amp 1 Volt / EL) : 500A
---------
Made In Italy
|
