- Portable battery charger
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 300W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 12A
- Effective charging current (Amp) : 20A
- Battery capacity (Ah min/max) : 10 / 250Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy

- This powerful jump starter from DECA easily jump starts 12V vehicles, charges small electronic devices, and provides portable LED lighting for when you need it most. Up to 15000mAh high capacity power bank. 1500A Peak current allows you to jump start any 12V car, truck, boat, or motorcycle. Smart & Safe Jumper Cable protects against polarity, over-discharge, low voltage, reverse charging, short-circuit, overheat, spark-proof, and timing out. Built-in LED flashlight, - strobe light, and hazard light provides different lighting options for normal or emergency situations. USB ports for charging smartphones, tablets, and other small electronic devices. Battery status lights indicate the current battery level. Recharge the jump starter at home or in the car with the included USB cable. Compact design fits in your car glove compartment.

Technical details:
- Input Voltage: 100/240V - 50/60Hz - 1Ph
- Battery voltage: 12V
- Peak Current Rating: 1500A
- Joules rating: 8000J
- Capacity: 15000 mAh
- 12V startboost output
- USB 5V - 2,1A output
- DC 19V - 3.5A output
- 14V - 1A Jack-input
- 5V - 1A Micro-USB-input
- Gas engine rating: 5000cc
- Diesel engine rating: 3500cc
- Full Charge Time: 5 uur
---------
Made In Italy

- Jump starter and Power Bank with lithium battery (technology LiFePO4 = Lithium - Iron - Phosphate).
- Quick start of motorcycles, cars and vans with 12V and 24V battery.
- SMART BOOSTER TECHNOLOGY It protects against reverse polarity and short circuit and it prevents jump start operation if the FAST battery is discharged (voltage below 11V), preserving the device itself.
- Powering smartphones, tablets and other commonly used portable devices.
- High J-BME3s: it is the energy supplied by the jump starter within three seconds of cranking to keep the engine run.
- Reduced weight and size, the lithium battery stores four times the energy of a lead battery with the same weight.
- Quick charge
- High brightness LED lamp, with selectable fixed lighting, flashing alarm and SOS signal.

Technical details:
- Input voltage : 1 Ph - 100/240V 50/60 Hz
- Boosting voltage (Volt) : 12-24V
- Boosting current max (Amp) : 12V 3000A - 24V 2000A
- Boosting current (1V/C) (Amp) : 12V 700A - 24V 500A
- Battery capacity : 35000mAh
- Battery types : Automotive: Pb (WET - AGM - GEL)
- J-BME3s (Joule-Battery Maximum Energy) : 20000J
- For engines up to - Ta=25°C - (Petrol) : 8000cc
- For engines up to - Ta=25°C - (Diesel) : 5000cc
- USB 1 output : 5V - 2,1A
- USB 2 output : 5V - 1,0A
- DC output : 12V - 10A
- Input (Jack) : 15V - 1A
- Charging time : 7h
---------
Made In Italy

- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 530W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 3,0 - 6,5 - 13A
- Effective charging current (Amp) : 22A
- Battery capacity (Ah min/max) : 15 / 260Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy

- Automatic battery chargers with program for charge conservation (pulse recharge).
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop.
- Multi step charging: the batteries are charged by applying sophisticated multi-step programs.
- High efficency: "I-U" Charging characteristic (constant current - constant voltage) minimises battery charging time.
- Maintenance Function "Pulse Maintenance": can remain connected to the battery for a long time. Keeps the battery ready for use through the pulse charge.
- Safety guaranteed: designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof.
- Protection degree: IP65
- Lightweight and compact battery charger.
> Built for outdoor use.
> 8 Steps charging program.
> Battery, starter and alternator tester
- 5 different operation modes:
> Normal Charging: 7,0 Amp - 14,4 Volt >>> 7,0 Amp - 14,7*Volt
> * Cold weather and AGM Power batteries
> Battery "Equalization" function can be added to all charging programs (Reconditioning: 1,5Amp 16,0 Volt).
- DC Power supply (7 Amp 13,6Volt). Starting the charge of batteries having to low charge / "Back-up".

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 120W
- Voltage limitation (Volt) : 14,4 - 14,7V
- Nominal battery voltage (Volt) : 12V
- Average charging current (Amp) : 7A
- Battery capacity (Ah min/max) : 14 - 150Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 5
- Protection degree (IP) : IP65
---------
Made In Italy

- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 760W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 5,5 - 11 - 22A
- Effective charging current (Amp) : 37A
- Battery capacity (Ah min/max) : 30 / 450Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy