- Battery chargers and starter
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Fast charging with timer
- Boosting remote control
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU: 100% Copper windings

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 3 Ph - 230/400V
- Power (kW) : 5,8 / 42 kW
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 130A (12V) / 180A (24V)
- Effective charging current (Amp) : 130 / 180A
- Battery capacity (Ah min/max) : 25 / 2200Ah
- Battery types : Automotive: Pb (WET - AGM)
- Charging positions (N°) : 10
- Boosting Current (Amp 0 Volt CC) : 2500A
- Boosting current (Amp 1 Volt / EL) : 1500A
---------
Made In Italy

- Portable battery charger
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU:100% Copper windings

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 1000W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 35A
- Effective charging current (Amp) : 50A
- Battery capacity (Ah min/max) : 15 / 500Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy

- Automatic battery chargers with program for charge conservation (pulse recharge).
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop.
- Multi step charging: the batteries are charged by applying sophisticated multi-step programs.
- High efficency: "I-U" Charging characteristic (constant current - constant voltage) minimises battery charging time.
- Maintenance Function "Pulse Maintenance": can remain connected to the battery for a long time. Keeps the battery ready for use through the pulse charge.
- Safety guaranteed: designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof.
- Protection degree: IP65
- Lightweight and compact battery charger.
> Built for outdoor use.
> 8 Steps charging program.
> Battery, starter and alternator tester
- 5 different operation modes:
> Normal Charging: 7,0 Amp - 14,4 Volt >>> 7,0 Amp - 14,7*Volt
> * Cold weather and AGM Power batteries
> Battery "Equalization" function can be added to all charging programs (Reconditioning: 1,5Amp 16,0 Volt).
- DC Power supply (7 Amp 13,6Volt). Starting the charge of batteries having to low charge / "Back-up".

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 120W
- Voltage limitation (Volt) : 14,4 - 14,7V
- Nominal battery voltage (Volt) : 12V
- Average charging current (Amp) : 7A
- Battery capacity (Ah min/max) : 14 - 150Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 5
- Protection degree (IP) : IP65
---------
Made In Italy

* Professional battery charger and stabilized power supply controlled by microprocessor.
- High efficiency with inverter and PFC technology.
- Easy to use thanks to the quick use menu and buzzer sound.
- Programs are multi-language.
* Battery charger
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start&Stop and Lithium-Ion batteries (LiFePO4).
- "I-U0" Charging characteristic with fl oating maintenance; customizable multi step charging program.
- Battery equalization and desulphation functions.
* Stabilized power supply
- Power supply to support diagnostics and setup of automotive electronic control units.
- Back-up function to power vehicle electronics while the battery is being replaced.
- Power supply for showrooms vehicles (with or without battery); "lockup" function to avoid improper use; option for automatic start up when powered by the network.
- Stabilized power supply adjustable in voltage and current for particular uses.
- Thanks to the SD Card reader, it is possible to update the software adding new charging programs.
- It is possible to use cables of diff erent length (up to 5m) keeping the device calibrated.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 2000W
- Voltage limitation (Volt) : 16V
- Nominal battery voltage (Volt) : 12V
BATTERY CHARGER:
- Average charging current (Amp) : 2 - 120A
- Battery capacity (Ah min/max) : 2 - 2400Ah
- Battery types : Automotive : Pb (WET - AGM - GEL) - Lithium (LiFePO4)
- Traction : Pb (Deep Cycle)
- Charging programs : 5
STABILIZED POWER SUPPLY:
- Output voltage regulation : 12 - 15V
- Output current : max 120A
- Max output voltage : 16V
- Standard cables lenght : 2 m
- Protection degree (IP) : IP20
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,36 - 13,5 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 40A
- Effective charging current (Amp) : 60A
- Battery capacity (Ah min/max) : 5 - 800Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 400A
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,7 - 16,8 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 50A
- Effective charging current (Amp) : 80A
- Battery capacity (Ah min/max) : 5 - 1000Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 900A
- Boosting current (Amp 1 Volt / EL) : 500A
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca and traction batteries DEEP CYCLE.
- "Safe Charge & Boost" The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 40839 interference emission level I).
- Furthermore, the voltage thresholds for the charging steps may be modified in order to adapt them to special batteries. (eg: Optima, MaXXima).
- This battery charger helps you to check that the battery voltage selected is the right one, and if a short circuit or a reverse polarity occurs.
- 4 Multi step charging programs The lead batteries WET, AGM, GEL, Ca/Ca and traction "Deep cycle", are charged by applying sophisticated multi-step programs: (IU0U; IUI0U; IU).
> Charging
> Equalization
> Maintenance ("Floating")
> Desulphation
- Continuously adjustable charge current Lets you charge optimally batteries of all capacities (Ah).
"Booster" function for start assist
- Temperature sensor Automatically compensates any charging voltage according to ambient temperature.
- Battery check The battery charger checks if the battery is sulphated and if it can store the charge.
- "Memory" The function makes this product easy to use: Just connect the battery charger to a battery and to the mains and charging begins following the last programme set.
- "Back-up" The function powers the vehicle electronics while the battery is being replaced and so saved data are not lost (radio and seat settings, for instance).

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,2 - 10kW
- Voltage limitation (Volt) : Adjustable
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Effective charging current (Amp) : 60A
- Battery capacity (Ah min/max) : 5 - 800Ah
- Battery types : Automotive : Pb (WET - AGM - GEL)
- Traction: Pb (Deep Cycle)
- Charging programs : 4
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 350A
- Boosting current (Amp 1 Volt / EL) : 300A
---------
Made In Italy

- Wheeled battery charger and quick starter / Battery 12 - 24 Volt, 35 > 800 Ah
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, Start & Stop
- Fast charging with timer
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 2,3 / 15 kW
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 70A
- Effective charging current (Amp) : 105A
- Battery capacity (Ah min/max) : 35 / 800Ah
- Battery types : Automotive : Pb (WET - AGM)
- Charging positions (N°) : 4
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 460A
---------
Made In Italy