- Battery chargers and starter
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Fast charging with timer
- Boosting remote control
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU: 100% Copper windings

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 3 Ph - 230/400V
- Power (kW) : 5,8 / 42 kW
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 130A (12V) / 180A (24V)
- Effective charging current (Amp) : 130 / 180A
- Battery capacity (Ah min/max) : 25 / 2200Ah
- Battery types : Automotive: Pb (WET - AGM)
- Charging positions (N°) : 10
- Boosting Current (Amp 0 Volt CC) : 2500A
- Boosting current (Amp 1 Volt / EL) : 1500A
---------
Made In Italy

* Professional battery charger and stabilized power supply controlled by microprocessor.
- High efficiency with inverter and PFC technology.
- Easy to use thanks to the quick use menu and buzzer sound.
- Programs are multi-language.
* Battery charger
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start&Stop and Lithium-Ion batteries (LiFePO4).
- "I-U0" Charging characteristic with fl oating maintenance; customizable multi step charging program.
- Battery equalization and desulphation functions.
* Stabilized power supply
- Power supply to support diagnostics and setup of automotive electronic control units.
- Back-up function to power vehicle electronics while the battery is being replaced.
- Power supply for showrooms vehicles (with or without battery); "lockup" function to avoid improper use; option for automatic start up when powered by the network.
- Stabilized power supply adjustable in voltage and current for particular uses.
- Thanks to the SD Card reader, it is possible to update the software adding new charging programs.
- It is possible to use cables of diff erent length (up to 5m) keeping the device calibrated.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 2000W
- Voltage limitation (Volt) : 16V
- Nominal battery voltage (Volt) : 12V
BATTERY CHARGER:
- Average charging current (Amp) : 2 - 120A
- Battery capacity (Ah min/max) : 2 - 2400Ah
- Battery types : Automotive : Pb (WET - AGM - GEL) - Lithium (LiFePO4)
- Traction : Pb (Deep Cycle)
- Charging programs : 5
STABILIZED POWER SUPPLY:
- Output voltage regulation : 12 - 15V
- Output current : max 120A
- Max output voltage : 16V
- Standard cables lenght : 2 m
- Protection degree (IP) : IP20
---------
Made In Italy

- Professional microprocessor-controlled battery charger and starter.
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
- "Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
- Multi step charging The batteries are charged by applying sophisticated multi-step programs.
- Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
- Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
- Charging with timer
- Boosting remote control
- Digital Voltmeter / Ammeter
- Overload protection with automatic reset
- Inversions of polarity and short circuits protection
- Heavy duty clamps

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 1,7 - 16,8 kW
- Voltage limitation (Volt) : 14,8V (12V) - 29,6V (24V)
- Nominal battery voltage (Volt) : 12 - 24V
- Average charging current (Amp) : 50A
- Effective charging current (Amp) : 80A
- Battery capacity (Ah min/max) : 5 - 1000Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging positions (N°) : STEPLESS
- Boosting Current (Amp 0 Volt CC) : 900A
- Boosting current (Amp 1 Volt / EL) : 500A
---------
Made In Italy

- Wheeled battery charger and quick starter / Battery 12 - 24 Volt, 35 > 800 Ah
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, Start & Stop
- Fast charging with timer
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (kW) : 2,3 / 15 kW
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 70A
- Effective charging current (Amp) : 105A
- Battery capacity (Ah min/max) : 35 / 800Ah
- Battery types : Automotive : Pb (WET - AGM)
- Charging positions (N°) : 4
- Boosting Current (Amp 0 Volt CC) : 700A
- Boosting current (Amp 1 Volt / EL) : 460A
---------
Made In Italy

Features:

Software:
1. Full vehicle system diagnosis, coverage for abundant US, Asian, and European makes and models
2. Automatically identify VIN upon connection to the vehicle for intelligent diagnosis
3. 33 service functions for the main brands
4. Remote diagnosis allowing you to work on a vehicle from your tool without being on-site
5. Read all DTC types for the full system, view, graph, and record data PIDs, support bi-directional controls, actuation tests, and all other diagnostic function
6. Compatible with immobilizer and WiFi printer module
7. Integrated database with comprehensive vehicle service and repair information
8. Diagnostic records and reports can be stored in the cloud without any concern of data missing
9. One-click upgrade and silent install of software

Hardware:
1. Android 7.0 operating system with four-core processor for fast, reliable operation
2. 8-inch touchscreen display with high resolution for precise details
3. PUSH PUSH connector with practical design for easy storage
4. DBSCar IV VCI with stable Bluetooth connectivity
5. TYPE C interface

Specification:
Processor: 1.3GHz 4-core
Memory: 2GB
Storage: 32 GB
Operation System: Android 7.0
Display: 8-inch IPS
Resolution: 1280×800
Camera: Rear 5 Megapixels
Diagnostic Communication: Bluetooth
Working Temperature: 0 - 50°c
Dimension: 226 x 203 x 43.6mm

- The Dent Puller SW 28 LAB welding power source meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence. Designed and manufactured with care at the San Marino factories.
- The SW 28 LAB model is specifically designed for bodywork work, repairing dents and straightening thin steel sheets. It offers different functions for many uses through the various accessories.
- The SW 28 LAB model delivers 4500 Amp. The power supply voltage is single phase at 230 Volt.
The main features are:
> Easy to use: time and power adjustment is indicated in a help table.
> Gun with trigger: the welding spot is controlled through the trigger.
> Tack mass: for an easy and safe connection to the workpiece.
> Single-sided single-point welding.
> Single-sided pulsed spot welding for patches.
> Continuous welding.
> Sheet metal heating function with carbon electrode
> Gun with quick coupling to easily replace tools.
> Equipped with a trolley for easy transportation

Technical details:
- Welding current range (I2 MAX) : 4500A
- Welding current range (I RMS) : 400 - 2800A
- Open circuit voltage (Volt) : 2,4 - 7,4V in 50 steps
- Input voltage (50/60 Hz) : 1 Ph - 230V
- Max input power (kW) : 50% / Max = 2,7 / 4 kW
- Open circuit voltage : 2,4 - 7,4V in 50 steps
- Input voltage : 1 Ph - 230V 50/60 Hz
- Fuse : 16A
- Weldable metals : Steel, inox, galvanized steel
FEATURES:
- Power setting : yes
- Time setting : yes
- Welding parameters chart : yes
- Single spot welding : yes
- Pulsed spot welding : yes
- Continuous spot welding : yes
- Carbon heating electrode : yes
- Copper Transformer : yes
- Thermostatic Protection : yes
---------
Made In Italy