Main voltage 230V/ 1 phase/ 50/60Hz
Power: 110W
Charge/ starter voltage: 12/ 24V
Charge current: 6/ 4.5A
Rated charge current: 4/ 3A
Rated reference capacity (12V): 40/ 55 Ah
Rated reference capacity (24V): 24Ah
Dimensions: 95 x 190 x 180 mm
Weight: 2.6 kg

Battery charger and starter for 12/24V WET batteries and rapid cranking of all types of cars, vans, light goods vehicles, excavators, tractors, and lorries.
Fast (BOOST) charge and rapid cranking.
Remote control. Timer to program timed BOOST charge and avoid overloading the battery.
Display of charging and cranking current.
Protection against overcharging and pole inversion.

Technical details:
Single-Phase Mains Voltage: 400 V
Mains Frequency: 50 / 60 HZ
Charging Absorbed Power: 2,5 KW
Start Power: 20 KW
Charging Voltage: 12 / 24 V
Effective Charging Current: 100 Amb
Start Current 1V/C EN60335-2-29: 640 Amb
Max Starting Current: 1000 A
Mini Rated Reference Capacity: 20 AH
Max Rated Reference Capacity: 1200 AH
Adjustment Positions: 5
Dimensions: 38 X 56 X 88,5 CM
Weight: 45 KG

Battery charger and starter for 12/24V WET batteries and rapid cranking of all types of cars, vans, and light goods vehicles.
Normal charge, fast (BOOST) charge, rapid cranking selection.
Display of charging and cranking current.
Protection against overcharging.

Technical details:
Single-Phase Mains Voltage: 230 V
Mains Frequency: 50 / 60 HZ
Charging Absorbed Power: 1 KW
Start Power: 6,4 KW
Charging Voltage: 12 / 24 V
Effective Charging Current: 45 Amb
Start Current 1V/C EN60335-2-29: 180 Amb
Max Starting Current: 300 A
Mini Rated Reference Capacity: 20 AH
Max Rated Reference Capacity: 700 AH
Adjustment Positions: 3
Dimensions: 30,5 X 36 X 63 CM
Weight: 13,4 KG

Battery charger with TRONIC technology for WET, GEL, AGM, MF, PbCa, EFB 12/24V batteries.
BOOST (fast charge) function.
Loading current display, protection against pole inversion, short circuit.

Technical details:
Single-Phase Mains Voltage: 230 V
Mains Frequency: 50 / 60 HZ
Charging Absorbed Power: 300 W
Charging Voltage: 12 / 24 V
Effective Charging Current: 18 / 12 Amb
Mini Rated Reference Capacity: 30 / 20 AH
Max Rated Reference Capacity: 225 / 180 AH
Adjustment Positions: 4
Dimensions: 22,5 X 29 X 20,5 CM
Weight: 7,2 KG

- Portable battery charger
- Suitable for charging lead batteries:WET serviceable and maintenance free, AGM, Start & Stop
- Charging current regulation
- Overload protection
- Short circuits protection
- Inversions of polarity protection
- Manual charge breaker
- CU:100% Copper windings

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 1000W
- Nominal battery voltage (Volt) : 12 / 24V
- Average charging current (Amp) : 35A
- Effective charging current (Amp) : 50A
- Battery capacity (Ah min/max) : 15 / 500Ah
- Battery types : Automotive : Pb (WET - AGM)
---------
Made In Italy

- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 530W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 3,0 - 6,5 - 13A
- Effective charging current (Amp) : 22A
- Battery capacity (Ah min/max) : 15 / 260Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy

- Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
- Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
- Multi step chargingThe batteries are charged by applying sophisticated multi-step programs.
- High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
- FloatingCan remain connected to the battery for a long time. Batteries are ready to use at all times.
- Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
- Battery Test Sulphated battery detection.
- "Sulfated Battery Recovery" Desulphation / Equalization programme. Regenerate batteries that have underdone heavy discharge cycles.
- Battery charger suitable for the workshop.

Technical details:
- Input Voltage (Volt 50-60Hz AC) : 1 Ph - 230V
- Power (W) : 760W
- Voltage limitation (Volt) : 7,4 - 14,8 - 29,6V
- Nominal battery voltage (Volt) : 6 - 12 - 24V
- Average charging current (Amp) : 5,5 - 11 - 22A
- Effective charging current (Amp) : 37A
- Battery capacity (Ah min/max) : 30 / 450Ah
- Battery types : Automotive: Pb (WET - AGM - GEL)
- Charging programs : 2
- Charging positions (N°) : 3
---------
Made In Italy

Professional battery charger for WET/START-STOP 6/12/24/36/48V batteries. With ammeter and voltmeter.
Allows simultaneous charging of multiple batteries connected in series.

Technical details:
Single-Phase Mains Voltage: 230 V
Mains Frequency: 50 / 60 HZ
Charging Absorbed Power: 1000 W
Charging Voltage: 6/12/24/36/48 V
Effective Charging Current: 11/30/30/30/27 Amb
Mini Rated Reference Capacity: 10 AH
Max Rated Reference Capacity: 100/300/300/300/300 AH
Adjustment Positions: 6
Dimensions: 28 X 35 X 32 CM
Weight: 12,7 KG